NBN FLIR A6 Series, User Manual

Page: 17 / 126

Installation (FLIR A6xx cameras) 5
5.3 Installation
5.3.1 General
Last-minute changes and other important information can be found in the read-me file on
the CD-ROM. We recommend that you read this file before you install the programs.
Note
• If you experience problems during the installation, visit our Customer Help at http://
support.flir.com.
• You must be an Administrator or a user with Administrative Rights to install the
programs.
• A complete installation consists of several subinstallations, some of which are from
third-party vendors. Do not abort these subinstallations, as they are needed for the
complete installation.
• A complete installation can take up to 10 minutes to complete.
5.3.2 Procedure
Follow this procedure:
1. Close down all applications.
2. Insert the ThermoVision System Tools & Utilities CD-ROM into the CD drive on the
computer. The installation should start automatically.
Should the installation not start automatically, start Windows Explorer and double-
click SETUP.HTM on the CD-ROM.
3. Click one of the following:
• Install FLIR IP Config.
• Install FLIR IR Monitor.
• Install FLIR IR Camera Player.
• Install AXXX Control & Image Interfaces.
4. Follow the on-screen instructions.
#T559950; r. AD/35720/35720; en-US 9