Using the mounting bracket.
Warning:
Some countries prohibit the mounting of any
electronic device on the vehicle dashboard. Be sure to check
your local laws for acceptable mounting areas before
installing the car mount bracket.
Clean the mounting surface with a glass cleaner and a
clean cotton cloth.
If the ambient temperature is below +15°C (60°F), you
can warm the mounting area and the suction cup (e.g.
with a hair dryer) to ensure a strong suction bond.
1. Insert SD card (see Photo 1)
1.1 Insert your SD card into the SD slot of NavRoad before
you mount the device Holder to your NR411.
Photo 1
2. Mounting the device holder and car mount with NR411.
(see Photo 2)
2.1 Fit NavRoad in the device holder first, and then firmly
dock the NR411 with device
holder on the car mount.
2.2 Press the suction cup of the car mount firmly against
to the windshield.
Photo 2
2.3 Press down the lever to fix the suction cup in place.
2.4 Adjust the angles of the arms to your proper viewing
position.
