2.0 Safety
General Safety Instructions
• Before operating the NavPIxel™ NPD0835 Monitor, read this User Manual thoroughly
• Keep this User Manual for future use
• Verify the computer system capability (see Packaging Contents & Installation) to insure
operation of the Monitor
• For expeditious installation, follow these User Manual instructions in sequence
• Adhere to all Caution and Warnings on system and as stated in this User Manual
Shock Hazards
This icon is intended to tell the User of a potential risk of electrical shock.
Instructional
This icon is intended to tell the User of important operating and/or
maintenance instructions.
WARNING!
CAUTION!
• User Manual instructions for installation and operation should be followed precisely
• Adjust only those controls covered by the User Manual’s operating instructions; improper
adjustment of other controls voids the unit’s warranty and may result in unit damage, and
• Adhere to local installation codes.
General Unit Safety
• Always disconnect the unit from the power source before cleaning
• Do not operate the unit with a damaged cord
• Do not operate if the unit has been dropped or damaged. The unit should be inspected
by our qualified Service Personnel
• Position the power cord so it is not in contact with hot surfaces
• Do not allow anything to rest on the power cord, and
• Do not place the power cord in the path of foot traffic.
General Safety Precautions
.
Power cord must be connected to a properly wired and grounded power
source
.
Any equipment to which the unit is attached must also be connected to
properly wired and grounded power sources
.
Do not connect or disconnect the unit during an electrical storm
.
Do not remove the unit covers ? there are no user serviceable parts in
the unit
.
Do not disassemble or modify the unit to avoid the possibility of electrical
shock, damage to electrical components or scratching the display
surface, and disassembly of the unit voids the warranty.
WARNING!
Page 6