5.2 Connectors
Connectors are located on the bottom of the unit housing, from left to right:
#1 Power, #2 USB Pass-through, and #3 VGA. (Figure 4)
Connectors are physically unique to insure the installer makes the proper connections.
(Figure 4)
VGA Connector
• The IP68 sealed VGA Cable, 1.8 m (6 ft), is in the shipping box
• Push the cable connector into the Monitor’s back panel 8-pin connector,
#3 in Figure 4
,
and
• Plug the standard DB-15 (video) female connector to the computer’s video source;
secure.
DC Power Connector
• The IP68 sealed DC Power Cable, 1.8m (6 ft), is in the shipping box
• Plug in the quick-connect 3-pin connector,
#1 in Figure 4
• To disconnect, pull the outside ring on the connector away from the unit until the
cable is free
USB Pass-through Connector
• The USB Pass-through Connector is an IP68 sealed 4-pin connector
• The USB Cable is with the product accessories; it is 1.8 m (6 ft)
• Plug in the cable connector into the Monitor’s back panel connector together.
#2 in Figure 4
• To disconnect, pull the outside ring on the connector away from the unit until free.
Page 12
