Navoto GSM Gateway
46
Copyright © 2011, Navoto. All Rights Reserved.
http://www.navoto.com
•
Hardware Settings
o
DTMF Level
- determines the volume of the DTMF signal to the phone company
that you generate when you press the phone’s touch keys.
o
DTMF Length
- determines the length of the DTMF signal.
o
CID Level
- for every PBX phone extension line the level of the CID is different, in
order to recognize the CID you should choose the correct level based on your
PBX instructions.
o
Flash Digit
- when you receive
Call Back
or
Call Through
from your PBX phone
extension line and you choose to add another call on the same line, in most PBX
systems you need to press the # key. Refer to your PBX instructions and if you
determine a different key must be pressed, select it in this field.
o
Flash Length
- determines the length of the tone of the Flash Digit signal.
o
Ring Back
- determines the number of rings when you call to the Navoto
Gateway before it answers and calls you back.
o
Cellular Dial Length
- determines the maximum number of digits the system will
accept (example: 004-412-3456789 = 13 digits).
