24
NAVMAN
G-PILOT 3380 Operation Manual
Options menu:
Data setup
- Selects what data is displayed in the info
panel.
Auto Rd/CE/XTE
– Automatically switches the
displayed data between rudder, course error and
cross track error depending on the operating mode.
Course error
– Shows a course error bar in the info
panel.
Rudder angle
– Shows a rudder angle gauge in the
info panel.
XTE
– Shows a cross track error bar in the info panel.
4
The displays
Press
key to show the Display menu, select a display option using the
Control Dial and press
.
Tip:
Repeated pressing
will cycle the menu selection and will automatically
select after 1 second.
4-1
Display > Basic
Displays a standard G-PILOT display with just the essential G-PILOT data.
Display area
Function
1
Drive
indicators
Left and right boxes light up to indicate when the G-PILOT is driving the
rudder
2
Heading
Large digits show the heading of the vessel
3
Info panel
This panel can be configured to display different data items. Default:
Automatically switches between Rudder angle, Course error and Cross track
error.
4
Set course
STBY
mode: shows ‘---’ since the set course is not valid in standby mode
AUTO
mode: digits show the current course to steer (CTS), except for
WIND
mode: digits show the current set wind angle (SWA)
The colored ring is
yellow
in
STBY
mode,
green
in
AUTO
mode,
magenta
in
H-STEER
mode and
red
when there is a critical alarm
5
Steering
mode panel
Shows the steering mode (COMPASS, GPS, WIND)
6
Operating
mode
panel
Shows the operating mode (Standby, Auto, H-Steer). Panel changes to blue
when in
AUTO
mode.
Basic displays
1
2
3
4
5
6