G-PILOT 3380 and Operation Manual
NAVMAN
23
3-12-1 The alarm window
The alarm window shows a list of the latest
active alarms. The most severe alarms appear
at the top of the list.
Turn the Control Dial to stop the G-PILOT 3380
from beeping.
Select
‘Details
’ to acknowledge the displayed
alarms and jump directly to the Alarm history
screen.
Select ‘
OK
’ to acknowledge the displayed
alarms.
3-12-2 Active alarms
The Active alarms screen shows a list of the
currently active alarms.
To show the Active alarms screen:
• Select ‘
Active alarms
’ in the Display menu or,
•
Go to
Menu > Setup > Alarms > Active alarms
.
Turn the Control Dial to select an alarm in the
list and press
to see the Alarm details.
3-12-3 Alarm history
The G-PILOT 3380 keeps a record of alarms. The
Alarm history screen shows a list of up to 18
recorded alarm events.
To show the Alarm history screen:
• Select ‘
Details’
from the alarm window or,
• Go to
Menu > Setup > Alarms > Alarm History
.
Turn the Control Dial to select an alarm in the
list and press
to see the Alarm details.
3-12-4 Alarm details
The alarm details window shows extra detail on
an individual alarm.
3-13 Keylock
When keylock is activated, the G-PILOT 3380
will ignore most key presses.
• To turn keylock on:
Press and hold the
key for 2 seconds. A
‘
Keys locked
’ message will appear and a small lock
icon will appear on the lower right-hand display.
•
To turn keylock off:
Press and hold the
key for 2 seconds. A ‘
Keys
unlocked
’ message will appear and the keys are
re-enabled.
3-14 Simulate mode
If the word ‘
Simulate
’ flashes on the display,
then the unit is in simulate mode.
• Simulate mode allows you to become
familiar with the unit off the water.
• Simulate mode can be turned on or off:
Menu > Setup > Simulate
menu.
Warning:
Do not use simulate mode while at sea.