Version 24.02.2021
HW CAM(V100) / (V35, V36, V40)
RL4-MIB2-E18
P
a
g
e
23
3.
Interface operation by external keypad
The interface’s external keypad can be used to switch the enabled inputs.
➢
Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources.
Each press (approx. 2 sec) will switch to the next enabled input. If all inputs are enabled the
order is:
Factory video
→
video IN1
→
video IN2
→
factory video
→
…
Disabled inputs will be skipped.
Note:
The interface switches
after releasing
the switch (after long pressure).
➢
Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces switches from the factory video
to the front camera input and back to factory video.
