Version 24.02.2021
HW CAM(V100) / (V35, V36, V40)
RL4-MIB2-E18
P
a
g
e
7
1.5.1.4.
Monitor size (dip 7 and dip 8)
Dip 7 and 8 are for monitor-specific video settings which cannot be predicted as even within
the same head-unit version, the monitor specifications may vary. It is necessary to try all
possible combinations (both OFF, both ON, 7 OFF and 8 ON, 7 ON and 8 OFF) - while a
working video source is connected to the chosen input of the interface - to see which
combination gives the best picture quality and size (some may give no picture). It is possible
to first hot plug through the dip combinations, but if you do not experience any change of
picture after trying all 4 options, retry and disconnected the 6pin power plug of the video-
box between every change of the dip setting.
Note:
Dip 4 and dip6 are out of function and have to be set to
OFF
.
After each Dip-switch-change a power-reset of the Video Interface has to be performed!
1.5.2.
4 dip - red
By using the Dip-switches, the factory Head-unit or vehicle can be chosen which the
interface will be connected to.
Dip position down is
ON
and position up is
OFF
.
Set all dip switches to off
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
All vehicles
OFF
OFF
OFF
OFF
