Version 05.11.2018
HW:
CAM(V97)/(V14)
RL3-NBT2 / Rl3-NBT2-10
P
a
g
e
7
1.5.
Settings of the 4 Dip switches (CAN functions – red)
Dip position down is ON and position up is OFF.
Fahrzeug/Navigation
Dip
1
Dip 2
Dip 3
Dip 4
BMW/Mini NBT system (with Apix)
OFF
ON
OFF
OFF
BMW NBT2 system (with Apix2)
OFF
OFF
OFF
OFF
Mini NBT2 system (with Apix2)
OFF
ON
OFF
OFF
Note:
In case of absent or defective picture representation or faulty CAN communication, try
also dip switch 2 in OFF position!
After each Dip-switch-change a power-reset of the Can-box has to be performed!
2.
Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
Before a final installation, we recommend a test-run to ensure the compatibility of the
vehicle and the interface. Due to changes in the production of the vehicle manufacturer
there’s always a possibility of incompatibility.
2.1.
Place of installation
The interface is supposed to be installed at a suitable location behind the vehicle`s head-
unit.
