Version 05.11.2018
HW:
CAM(V97)/(V14)
RL3-NBT2 / Rl3-NBT2-10
P
a
g
e
10
2.3.1.2.
RL3-NBT2-10
Disconnect the factory picture signal cable’s bordeaux coloured HSD+2 connector from the
rear-side of the monitor and connect it to the bordeaux coloured HSD+2 connector
„
HU IN
“
of the video interface .
Connect the not-angled bordeaux coloured HSD+2 connector of the enclosed picture signal
cable
CAB-HSD2
-DF
100
to the previously become free bordeaux coloured HSD+2 connector
at the monitor’s rear side.
Connect the opposite angled bordeaux coloured HSD+2 connector of the enclosed picture
signal cable
CAB-HSD2
-DF
100
to the bordeaux coloured male HSD+2 connector
„
TO LCD
“
of
the video interface.
Attention:
The picture signal cable’s connecting direction doesn’t have an impact on the
system’s function, so that the angled and not-angled HSD+2 connectors are allowed to be
interchanged, depending on the HSD+2 connectors mounting space.
However, mixing up/interchanging the connections of
„HU IN“ and „TO LCD“
will cause
dysfunktion or even damage to the system!
Note:
The colours of the HSD+2 connectors at monitor and head unit may vary.
