Version 05.11.2018
HW:
CAM(V97)/(V14)
RL3-NBT2 / Rl3-NBT2-10
P
a
g
e
5
1.3.
Boxes and connectors – video interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and
converts them for the video interface.
1.4.
Settings - 8 Dip switches (black)
Some settings have to be selected by the dip-switches of the
video interface.
Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
PDC
enabled
disabled
2
CVBS Video 1-input
enabled
disabled
3
CVBS Video 2-input
enabled
disabled
4
No function
set to OFF
5
Rear-view cam type
after-market
factory or none
6
Guide lines
enabled
disabled
7
Monitor
adjustments
Try all possible combinations of Dips 7 and 8 to receive
the best picture (quality and size) or
see chapter “Monitor selection (dip 7 and 8)”
8
