Version 05.11.2018
HW:
CAM(V97)/(V14)
RL3-NBT2 / Rl3-NBT2-10
P
a
g
e
13
2.5.
Connection - video sources
It is possible to connect an after-market rear-view camera and two more Video sources to
the video-interface.
Before a final installation of the video sources, we recommend a test-run to ensure the
compatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there’s always a possibility of incompatibility.
Connect the 12pin interface cable’s female 12pin connector to the male 12pin connector of
the video-interface.
Connect the video RCA of the video source 1 and 2 to the female RCA connector
“Video IN1”
and
”Video IN 2”
of the 12pin interface cable.
Connect the video RCA of the rear-view camera to the 12pin interface cable’s female RCA
connector
“Camera IN”
.
