User’s manual NAVIGON 63xx
- 24 -
Navigation
6.3
Deactivation of the voice commands function
The voice commands function will be deactivated under the following
conditions:
►
If you operate the navigation device with your finger while a voice
command is expected from you.
►
If a call is received and during an active phone call if the navigation
device is being used as a hands-free module.
6.4
Configuring the voice commands function
You can configure for which tasks you want to use voice commands.
►
In the
N
AVIGATION
window tap on Options > Settings > General >
Use Voice Command.
Select the tasks for which you want to use Voice Command:
►
Complete: You can use all the voice command functions.
►
Answering: You can enter addresses and answer questions
asked by the navigation device.
►
Entering Addresses: You can enter only addresses with the
voice command function.
Note:
For details of how to enter the destination address using voice
commands refer to the chapter "Entering a destination by voice
commands" on page 30.
The volume of the voice commands assistant can be controlled
independently of the volume of the navigation instructions. This means
you can still hear the speak prompts when you have muted the
navigation instructions.
1. In
the
N
AVIGATION
window tap on Options > Settings > General >
Volume of the Assistant.
2. Select the volume for the assistant.
Note:
For details of how to configure the navigation system refer to the
chapter "Configuring the NAVIGON 63xx" on page 90.
7 Navigation
Use the navigation system at your own risk.
Caution!
Be sure to refer to all the safety information in chapter
"Important safety information" on page 10.