User’s manual NAVIGON 63xx
- 12 -
Before you begin
Caution!
When installing the cradle, make sure that it will not pose a
risk in the event of an accident.
Caution!
Do not run cables directly next to safety-relevant devices and
power supplies.
Caution!
Check that the cradle is secured and adjusted properly before
each journey. The suction cup may become loose after a while.
Caution!
After installation, check all safety-relevant equipment in the
car.
Caution!
Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
Caution!
Disconnect the car charger cable from the cigarette lighter
whenever you park the car. The integrated mains adapter always
consumes a small amount of energy and could drain the car battery.
2.5
Preparing the NAVIGON 63xx for use
2.5.1 Installing
the
navigation system in the vehicle
Caution!
Be sure to refer to all the safety information in chapter
"Important safety information" on page 10.
Securing the cradle
1. Clean the suction cup and that part of the windscreen to which you
want to secure the cradle. Both must be dry and free of dirt and
grease.
2. Open the lever on the suction cup as far as possible.
3. Place the cradle suction cup against the windscreen.
4. Press the lever towards the windscreen.
