User’s manual NAVIGON 14xx | 24xx
Navigation
- 37 -
5.4.4
Managing routes
You can save each planned route under a particular name.
Note:
Only the start point and route points will be saved, not the
calculated route. When you load a saved route, it must be recalculated
before navigation can start.
You can load, rename or delete stored routes.
Saving routes
The
R
OUTES AND
T
RACKS
window is open. You have entered the
starting point and at least one route point.
1. Tap
on
Options > Save Route.
2. Enter a name for the route.
3. Tap on Save.
The destination is now saved to the
S
AVED
R
OUTES AND
T
RACKS
list.
The dialog window closes.
5.4.5
Loading routes or tracks
1. Tap
on
Options > Saved Routes and Tracks.
The
S
AVED
R
OUTES AND
T
RACKS
list opens. It shows all the saved
routes and tracks in alphabetical order.
A symbol in front of the name indicates whether it is a route (
)
or a track (
).
If you want to load a route:
2. Tap on the route that you want to load.
3. Tap on Load Route.
The
R
OUTES AND
T
RACKS
window opens. The starting point and the
route points of the loaded route have been entered. For the route
calculation the starting point is replaced by the current position. You
will now be guided to the first route point.
If you want to load a track:
2. Tap on the track that you want to load.
3. Tap on Load Track.
The
R
OUTES AND
T
RACKS
window opens. The current location is
entered as the starting point. The loaded track is entered as route
point 1. Navigation takes you first to the track starting point.
For details about navigating along recorded tracks refer to chapter
"Navigation in Track mode" on page 52.
