Navico 2kW Installation Manual Download Page 9 | Manualshive

Page: 9 / 80

background image

Introduction to the Navico radar system

|

7

Globalmap Baja 540c, GlobalMap Baja 840c,
Globalmap 5200c, Globalmap 5300c iGPS, GlobalMap
7200c, GlobalMap 7300c HD, GlobalMap 8200c,
GlobalMap 8300c HD, GlobalMap 9300c HD,
GlobalMap 9200c, LCX-38c HD, LCX-27c, LCX-37c,
LCX-28c HD, LCX-112c, LCX-113c HD, LMS-520c,
LMS-522c iGPS, LMS-522c iGPS Ice Machine, LMS-
525c DF, LMS-527c DF iGPS, X510c, X515c DF

2.1

Radar system overview

The radar system is intended for use in a marine environment. It consists of a rotating scanner

protected by a dome connected to a radar processor module by a prefabricated 15m (49ft)
interconnection cable. A longer 20 m (65.5 ft) interconnection cable may be ordered

separately. Scanner cables must be installed by a qualified radar technician.

A network or serial cable is to be used to connect the radar processor to a display head.

An interconnection cable should only be installed by a qualified radar technician.

The radar processor module connects to the various display heads using three different
protocols. These are:

Ethernet.

For more information on connecting via

Ethernet

(see "Connect Simrad GB40 or

Northstar 8000i" page 30).

•

GB40

•

8000i

Serial Connectivity

RS485

For more information how to connect to

RS485 displays

(see "Connect Simrad NX40 /

NX45, Northstar M84 / M121" page 38).

•

NX40 / NX45

•

M Series

RS422.

For more information how to connect to RS422

displays

(see "Connect Northstar 6000i /

6100i" page 42).

•

6000i / 6100i

•

GlobalMap, LCX, LMS and X ranges of displays. See above list for specific models.

2.2

Warnings

Use the radar at your own risk. Your radar was designed for use as a navigation aid. It
should not be used for purposes that require precise measurements of direction,

distance, topography or location. Always compare the navigation information received

from your radar with data from other navigation aids and sources. When a conflict
arises between the navigation data from your radar and data from other navigation

aids, make sure you resolve the conflict before proceeding with navigation. A

CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN NAVIGATION

INFORMATION.

«
...
7
8
9
10
11
...
»

Summary of Contents for 2kW

















































































Reviews:

No comments

Related manuals for 2kW

Brand: Raymarine Pages: 90

Brand: Furuno Pages: 2

Brand: B&G Pages: 63

Brand: Cobra Marine Pages: 22

Powerclutch XTR

Brand: Spinlock Pages: 3

Brand: JRC Pages: 72

HI-TARGET HD-MAX

Brand: Hi-Target GPS Pages: 177

Brand: F.u.n.k.e. Pages: 50

800ATC-H-260-260

Brand: F.u.n.k.e. Pages: 52

FENDERTEX FX-BST-800

Brand: PYI Pages: 2

NRG MARINE SONIHULL MONO

Brand: PYI Pages: 8

Brand: Teknim Pages: 3

Brand: Shockwave Pages: 11

Brand: Koden Pages: 234

Brand: Marine Audio Pages: 14

Brand: MARINE DATA Pages: 24

Brand: Dual Pages: 26

Brand: Odom Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands