Nautilus® Sport Series Treadmill Assembly Manual
step 5: securing the Left side on Console Assembly
Locate the following for this step:
Parts:
• assembly from step 4
Hardware:
• 3 Hex Head Bolts
(5/16 - #18 x 1)
• 3 Nylon Washers (5/16)
• 3 Flat Washers (5/16) - 1/2 inch outer diameter
tools:
• 1/2 inch socket with ratchet (not provided)
5-1 Fasten console onto Left Upright support using 3
bolts, flat and nylon washers.
5-2 tighten all bolts on the left side securely, including
Upright support bolts installed in step 1 .
Figure 5: step 5 securing Console Assembly
hex head Bolt
nylon Washer
Flat Washer
bASe ASSembly guide
imPORtANt!
mAKe SuRe thAt
the NylON WASheR
RAiSeD eDge iS NeX t
tO the uPRight
SuPPORt DuRiNg
iNStAll AtiON. See
hARDWARe StAcK iN
FiguRe 5.
