41
Replace the Drive Belt
on the Schwinn
™
IC3/IC7 Bikes
Skill Level: III
8018901.050119.B
Replacement Procedure
NOTICE: This document provides instructions for the replacement of the Drive Belt on the Schwinn
™
IC3 and IC7 Bikes.
If you need assistance, please call
Schwinn
Customer Service(if purchased in US/Canada) or your local distributor (if purchased out
VLGH86&DQDGD7R¿QG\RXUORFDOGLVWULEXWRUJRWRZZZQDXWLOXVLQWHUQDWLRQDOFRP
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
,PSRUWDQW6DIHW\,QVWUXFWLRQV%HIRUHVHUYLFLQJRUXVLQJWKLVHTXLSPHQWREH\WKHIROORZLQJZDUQLQJV
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause
injury to the service technician or bystanders.
• Keep bystanders and children away from the product being serviced at all times.
• Disconnect all power to the machine before you service it.
0DNHVXUHWKDWWKHUHSDLULVGRQHLQDQDSSURSULDWHZRUNVSDFHDZD\IURPIRRWWUDI¿FDQGH[SRVXUHWRE\VWDQGHUV
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your own.
•
Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved replacement parts can adversely
affect the safety and functionality of the equipment creating a risk to users and will void the warranty.
•
Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or
replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact
Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.
• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.
Tools Required (not included)
#2
Phillips
screwdriver
15
mm
Wrench
10
mm
Wrench
Flathead
screwdriver
16
mm
Socket
and
Wrench
15
mm
Socket
and
Wrench
25mm
Crank
puller
Tape
or
marking
pen
Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed
in China | © 2018 Nautilus, Inc. | Schwinn and the Schwinn Quality logo are trademarks owned by or licensed to Nautilus, Inc., which are registered or otherwise protected by common law in the United States and other coun-
tries. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY
™
