background image

Nautilus NS700X

#   Component  

Qty

   Rear Upright  

1

   Top Beam  

1

7   Front Upright  

1

   Leg Extension Frame  

1

 

 Main Base  

1

10   Backing Plate  

1

1   Connecting Plate B  

1

1   Connecting Plate E  

1

7   Hex Bolt - /” x  1/”L 

7   Hex Bolt - /” x ”L  

1

   /” Flat Washer  

7   /” Lock Nut  

1

Step 2 Components:

Procedure:

a.

 Attach Main Base (9) to Rear Base Frame (1) using Connecting Plate E (16) and the  

  hardware shown. Do not tighten hardware.

B

. Attach Rear Upright (5) to Rear Base Frame (1) and Rear Top Frame (2) using 

  Connecting Plate B (13) and the hardware shown. Do not tighten hardware.

c.

 Attach Leg Extension Frame (8) to Main Base (9) usingthe hardware shown. Tighten 

  hardware securely.

cauTioN:

 Leg Extension Frame (8) is heavy. Use two people to assemble this 

component.

D

. Attach Front Upright (7) to Leg Extension Frame (8) using the hardware shown.  

  Tighten hardware securely.

e.

 Attach Top Beam (6) to Front Upright (7) and Rear Top Frame (2) using Backing  

  Plate (10) and the hardware shown. Tighten all frame hardware securely..

ASSEmBLY 

STEP 2

Summary of Contents for Be strong NS 700X



























Reviews: