Nautilus Be Strong Commerical T912, Service Manual

Page: 10 / 130

10
3. Removing the Deck
3.1 Remove the right and left Rubber Side Extrusion
exposing the Side Rail Bolts (see Figure 3.1).
3.2 Remove the right Side Rail Bolts and Side Rail exposing
the Deck Bolts, then repeat for the left side (see Figure
3.2).
3.3 Remove the left side Deck Bolts, then repeat for the
right side (see Figure 3.3).
3.4 Lift and slide the Walk Deck out and replace if needed
(see Figure 3.4).
3.5 Reverse steps when re-installing the Walk Deck.
IMPORTANT: When reattaching the Walk Deck with the
Deck Bolts, apply a small amount of Loctite
#243 on the threads and torque to 15 in. lbs.
SECTION 1: MAINTENANCE
Figure 2.6
Figure 2.7
Figure 2.8
Figure 2.9
Figure 3.1
Figure 3.2