Installation Manual Chapter3. ATM Installation
© 2016
Nautilus Hyosung Inc.
All Rights Reserved. 3-9
Bolting Down the MX8800
► To bolt down the MX8800 using the Anchor Bolt Location Sheet (template), perform the following
steps:
1. Ensure that the surface where the MX8800 is to be placed is level so that the unit will not tip
over when opening the upper/lower modules or the door.
2. Place the anchor bolt location sheet where the MX8800 is to be installed.
3. Drill the correct diameter and depth holes at the locations marked on the sheet.
4. With the groove of the anchor bolt facing up, drive the anchors into the holes drilled in step 3.
5. Place the MX8800 on the bolt location sheet, matching the mounting holes of the unit with
the anchors.
6. Firmly tighten the mounting bolts in the anchors.