Installation Manual Appendix2.Module Setting
© 2016
Nautilus Hyosung Inc.
All Rights Reserved
.
A2-3
Bill Recycling Module (BRM) in the Safety Body
▶
Bill Recycling Module (BRM) in the Safety Body
1. Open the outer & safety door.
The correct opening procedure for a Cencon lock is,
1) Turn the dial left (CCW) until the letters “EC” (Enter Combination) appear on the
LCD.
2) Enter the factory combination of 50-25-50 by sequentially pressing those six
buttons. The LCD will display these numbers as they are entered.
3) When the combination has been correctly entered, the LCD will read:
“OPr”
meaning “Open right.”
4) Turn the dial right (CW) until it stops. The l
ock’s bolt is now retracted and the lock is
open.
5) Turn the handle to the left (CCW) and open the door.
<
Note
!> CW (Clock Wise), CCW (Counter Clock Wise)
2. Unfasten the screws (4ea) to remove the fixing bracket from the upper body of
BRM.
3. Unfasten the screws (8ea from the brackets on the top & bottom of lower body) and
take out the lower body of BRM.