NAUTICAST X-Pack DS User Manual Download Page 7

Page: 7 / 74

2.3. Explanation of the Soft Keys

The Soft Keys are divided into vertical static keys

[M1-M4]

and

horizontal dynamic keys

[M5-M8],

which differ in function according to the current application.

Soft Key Definition

[M1]

Reserved for future use

[M2]

Reserved for future use

[M3]:

Safety Message

This Soft Key allows direct Message Writing. Both broadcast or addressed messages
can be sent in this mode.

[M4]:

Display Settings

- Brightness and Contrast Regulator

This Soft Key allows the Display Settings to be changed between Daytime,

and Nightime Modes.

[Menu]: Go

Main Menu

or return to the Navigation View Screen.

[M5] – [M8]:

These Soft Keys are described in individual screens

2.4. Safety Keys

The

X-Pack DS

is fitted with Safety Keys, which allow the user to automatically send urgent messages

without the necessity of navigating the Menus.

[MOB]

The MOB Button sends out precise position of an MOB incident to Addressed Vessels,
therefore allowing the message to be sent to a vessel closest to accident location.

[SRM]

The SRM Button sends out emergency Broadcast Safety Related Messages to all ships
in the Vessel Listing.

Note:

For detailed description of the Safety Functions see Chapter 4.

X-Pack DS User Manual

Version 1.0

Page 7 of 74

Printed on 02.04.2003

Summary of Contents for X-Pack DS











































































Search results

Summary of Contents for X-Pack DS

Reviews:

Related manuals for X-Pack DS

Brands by name

Popular brands

NAUTICAST X-Pack DS, User Manual

Search results

Summary of Contents for X-Pack DS

Reviews:

Related manuals for X-Pack DS

Brands by name

Popular brands