3.5.3.
Voyage Settings (User Password Protected)
Note:
The default User Password is set at
“NAUT”
It is strongly recommended to change it immediately after commencing initial transponder operation!
Before entering Voyage Related Data for initial
X-Pack DS
operation, it is advised to configure the User
Password in:
Menu 5:
Configuration
Submenu 1: Change User Password
N 1^31' E 0^24' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
User password protected!
Please enter user password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
Dynamic Keys: Voyage Settings (User Password Protected)
[M5]
[Enter]
Confirm Password
Input
[M8]
[Exit]
Return to Vessel
Listing
After the Voyage Settings have been input and saved, this screen appears.
[Exit]
takes the user back to the Main Menu.
N 1^30' E 0^24' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Data saved.
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | | | <-Exit
X-Pack DS User Manual
Version 1.0
Page 37 of 74
Printed on 02.04.2003