Nautel VS1, Installation Manual, Page: 37 / 54

VS1 Installation Manual Commissioning tasks
Issue 2.0 2010-12-01 Page 8-7
4. If your network has a DHCP server and DHCP is set to
ON
(factory default), IP addresses
will be automatically assigned. Verify this has occurred by viewing the
IP Address
and
Netmask
address sub-menus (
Gateway
and
Nameserver
addresses are optional; view as
applicable). The
MAC Address
field cannot be modified.
5. If your network does not have a DHCP server or you wish to assign static IP addresses (i.e.,
direct connection with a laptop), set DHCP to
OFF
. Enter the appropriate addresses in the
IP
Address
,
Netmask
,
Gateway
and
Nameserver
sub-menus, as applicable.
6. Once you have established an IP address, you can login to the VS1’s advanced user interface
(AUI), which allows you to remotely control and monitor the VS1. See the “Operating the
transmitter” section of the Operations and Maintenance Manual for detailed AUI information)
.
Note:
Refer to “Network setup” on page 2-64 of the Operations and Maintenance Manual for more
information.