Nautel VS1, Installation Manual, Page: 34 / 54

VS1 Installation Manual Commissioning tasks
Page 8-4 Issue 2.0 2010-12-01
Figure 8.3: First Time Setup Completion Screen
4. When the audio setup in Step 3 is complete, the front panel should display a setup
completion screen (see Figure 8.3 ). Press the cancel (
X
) button to go back to the editing
screens. Press the checkmark button to finish the setup, which creates a new preset for the
VS1 (preset 1 or P1). The top level screen (see
Figure 8.4 ) will be displayed.
Figure 8.4: Top Level Screen
5. Enable the VS1’s RF output by pressing the cancel (
X
) button and the up arrow button
simultaneously. The RF status displayed on line 2 of the top level screen should change to RF
ON. The VS1 should be operating at the preset parameters defined for preset 1 (P1).
6. Check the four LEDs on the left-hand side of the front panel display. They should all be
green, indicating normal operation. If not, check for alarms by navigating to the front panel’s
Main Menu
->
View Status
->
View Alarms
screen. See the VS1 Operation and Maintenance
Manual for detailed information.
Preset 1
RF Status
Local/Remote Status
Defaulted to Local (LCL)