Nautel NX50, Operation And Maintenance Manual, Page: 65 / 166

NX50 Operations and Maintenance Manual Operating the transmitter
Issue 3.3 2016-02-08 Page 2-47
Figure 2.33: Meters - Information Display for Modules - Rack 1
NOTE:
Power modules are numbered (e.g., PM1, PM2, etc.) in the order they are plugged in, which is
not necessarily the same as their physical location in the transmitter. To match a meter or an alarm
with a specific power module, match the hexidecimal serial address (see
Figure 2.33 , shown within the
Front Panel Inhibit
button) with that shown on the label on the front of the power module.
On the modules summary screen ( Figure 2.33 ), meters for only ten power modules are shown on a
page. For transmitters with more than ten power modules, use the left and right arrow buttons on the
bottom of the page to cycle through the groups of ten power modules.
Individual power modules can be directly inhibited by pressing their
Front Panel Inhibit
button.
Press to view
* PM 1-10 shown
next ten modules
Press to view
previous ten modules