Nautel NX50, Operation And Maintenance Manual, Page: 102 / 166

NX50 Operations and Maintenance Manual Operating the transmitter
Page 2-84 Issue 3.3 2016-02-08
2. Click the Enable Traps check box to allow the SNMP agent to send trap notifications. and to
display two additional fields associated with traps. Enter the two additional fields as follows:
• Trap Receiver IP : Enter the IP address of the computer to which the SNMP agent will
send trap notifications. The computer must be running an SNMP application that is
configured to receive traps. The SNMP agent will send trap notifications to at most one
receiver.
• Trap Receiver Port: Enter the UDP port where the SNMP agent will send traps. The
default setting is 162.
3. When complete click
Apply
or click
Cancel
to restore the previous settings.