Nautel NX50, Operation And Maintenance Manual, Page: 22 / 166

NX50 Operations and Maintenance Manual Operating the transmitter
Issue 3.3 2016-02-08 Page 2-3
Information is displayed in a series of pages (screens) that serve specific transmitter functions. The
AUI has the following configurable displays:
• Instrumentation panels ( “Instrument Panels - viewing displays” on page 2-28 )
• Real-time meters ( “Meters page - viewing real-time meters” on page 2-43 )
• Transmitter status ( “Status - viewing transmitter status” on page 2-67 )
• Events logs ( “Viewing Transmitter Log” on page 2-21 )
• Presets ( “Presets - editing operational settings” on page 2-49 )
• System settings ( “System Settings page” on page 2-92 )
• Pre-correction settings ( “Precorrection Settings page” on page 2-101 )
• User Accounts ( “User Accounts” on page 2-69 )
• Changeover ( “Changeover page - changing exciter transfer settings” on page 2-110 )
• User settings ( “User Settings” on page 2-74 )
• Remote input/output configuration ( “Remote I/O page” on page 2-120 )
• Scheduler ( “Preset Scheduler” on page 2-64 )
• Audio Player ( “Audio Player” on page 2-125 )
See the complete AUI flow diagram illustrated in Figure 2.2 on page 2-5.
Logging into the AUI
The transmitter’s AUI provides a means to restrict local and remote access to transmitter control
functions to authorized users only. User accounts can be pre-defined to set access restriction from
read-only (no control) and full-administative control.
Access the AUI using a web browser as follows:
1. Configure your network settings (see “Setting up the Network” on page 2-75 ).
2. On your router or firewall software, open ports 3501 and 80 and close (restrict access to)
port 22. If you are using RDS data, open port 7005. If you are using SNMP, open port 161.