Nautel GV10, Installation Manual

Page: 36 / 62

GV10/GV7.5 INSTALLATION MANUAL INSTALLING CONTROL/MONITOR WIRING
PAGE 2.8.4 VERSION 3.0 2014-11-01
Figure 2.8.2: Remote Interface PWB Connections
REMOTE INTERFACE PWB
(A16)
CUSTOMER
ALARM/STATUS
CONNECTOR J1
(25-pin D-sub, female)
CUSTOMER
CONTROL
CONNECTOR J2
(25-pin D-sub, male)
EXTERNAL
INTERLOCK
TB1 (terminals
1 and 2)
FRONT DOOR AND SIDE PANEL
REMOVED FOR CLARITY
** EACH REMOTE CONTROL/MONITOR ENTRY HOLE HAS A REMOVEABLE PLATE WITH A PRE
CUT 1/4-INCH DIA HOLE. USE A CHASSIS PUNCH TOOL (e.g., GREENLEE) TO CREATE DESIRED
HOLE SIZE IN THE PLATE(S). REMOVE EACH PLATE (FOUR M4 SCREWS) BEFORE PUNCHING.
REMOTE CONTROL/
MONITOR ENTRY OPTIONS**
Use front holes (right hole preferred)
for remote interface PWB connections
(including LAN). Use rear hole for
controller connections (including LAN).
REMOVE THE PLATE TO ACCESS A 2.5-INCH HOLE, IF NECESSARY.