natus Grass S88X, User & Service Manual

Page: 36 / 64

7-36
Chapter 7
Operation
c
hoose
s
timulus
i
solatioN
u
Nits
To connect the Grass Stimulus Isolation Units to the S88X proceed as
follows.
1.
Press the SETUP touch-pad control.
2. Toggle down the list to CHOOSE STIMULUS ISOLATION UNITS by using the
TIMING thumbwheel control.
3. Press the ENTER/ACCEPT touch-pad control.
4. Use the TIMING thumbwheel control to select S1 STIMULUS ISOLATION
UNITS and press the ENTER/ACCEPT touch-pad control again.
5. Select the SIU to be used – SIU-V, SIU-C, SIU-BI, or PSIU6X connected
to the
S1 OUT
using the TIMING thumbwheel control and press the
ENTER/ACCEPT control.
6. Repeat for setting up the S2 Stimulus Isolation Unit as required.
When set up properly, the SIU Model will be displayed in the left side of
the display when either the
S2 FUNCTION or S2 FUNCTION is selected.
See the separate SIU operating manuals for more information.