© 2020 Natus Medical Incorporated
7
026057 RevE
Powering On and Off and Logging In and Off
Echo-Screen III Pro Instructions for Use
IMPORTANT:
Scan only barcodes supported by the device. If the barcode is too long, the
scanner cannot read it. Contact your administrator about supported barcodes.
Note:
Data that is encoded in the barcode with uppercase letters appears in
the field as lowercase letters.
Powering On and Off and Logging In and Off
•
To power on, briefly press the power button, and wait for the startup and splash screens.
The device starts in about a minute. Log in, if configured by your administrator. You may
need to enter a combination of user name, password, or location to log in.
•
When powered on, press the power button briefly to go into or out of standby mode.
•
To log off (if device is configured for logins), on the Home screen touch
Log Off
, or press
the power button to enter standby mode.
•
To power down, press and hold the power button for several seconds. At the power off
prompt, touch
OK
.
•
To force the device to shut down, press and hold the power button for about ten
seconds.
WARNING
Although the barcode scanner uses an LED light and not a laser beam, do not direct
the barcode scanner light toward anyone’s eyes.
Summary of Contents for Echo-Screen III Pro
Page 53: ......
Page 54: ...Echo Screen III Pro Instructions for Use 026057 RevE...
