https://www.naturewater.eu
Item 63924
Page 10
01 2024-1
Installation
The water softener must be installed, tested, and put into operation for the first time by a specialist. The
following installation steps are only intended as a guide (using a PPR pipe as an example).
1.
Install the water-inlet and -outlet pipes on the wall according to the actual height of the product
above the floor (sold separately).
№
Name
№
Name
1
Clamp (fixed water pipe)
4
Intake
2
Outlet
5
Inlet pipe
3
Outlet pipe
6
Clamp (fixed water pipe)
Note!
Please note the actual height and installation environment of the selected product.
2.
Connect the bypass pipe connection to the water inlet and outlet.
№
Name
№
Name
1
Clamp (fixed water pipe)
7
Inlet pipe
2
Connection point
8
Clamp (fixed water pipe)
3
Outlet
9
O-ring
4
Outlet pipe
10
2 points
5
Connection point
11
Connection point
6
Intake
Note!
Make sure that the O-ring has been fitted.
3.
Cut off one drain pipe and one overflow pipe as required and lay them accordingly (secure the
hose with a clamp), arrange the drain and overflow pipes, and connect them to the drain.
mm
