https://www.naturewater.eu
Item 63920, 63921
Page 3
11 2023-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Use and warning notices
Prohibition symbol
Any use described with this symbol is prohibited, as otherwise the prod-
uct could be damaged, the safety of users could be jeopardised, or ma-
terial damage could be caused.
Warning symbol
Any use described with this symbol must be carried out in strict compli-
ance with the regulations, otherwise the product could be damaged or
the safety of the user could be jeopardised.
Instruction symbol
All instructions marked with this symbol must be observed by the user,
otherwise the product may be damaged or other damage may occur
due to improper operation.
•
Installation, commissioning, or maintenance of this water treatment device must be carried out
by qualified personnel.
•
Liability for consequences caused by improper installation is excluded.
Safety instructions
•
The water treatment device can only be supplied with 12
V and 1500 mA. Observe all safety
precautions in connection with the operation of electrical appliances during operation and
maintenance.
•
If the mains cable of the water treatment device is damaged, it must be repaired by a qualified
electrician.
•
The water treatment device is only suitable for filtering pre-treated tap water. It cannot be used
to filter water with an unknown level of contamination or an unknown proportion of harmful or-
ganisms.
•
The water treatment liquid cannot be drunk directly. Do not drink it directly.
•
Do not block the overflow pipe and the drain pipe of the water treatment device.
•
Do not place any objects on the water treatment device.
•
Do not immerse the water treatment device in water.
•
Do not use the water treatment device outdoors or in direct sunlight.
•
The temperature of the water entering the treatment device must not exceed 38
℃
.
•
After the water treatment device has been shut off for more than a week, the water must be
drained during 5
min before water coming from the device can be used for food purposes.
•
The power supply must not be interrupted while the water treatment device is in use in order to
avoid timing errors, which would affect the originally set backwash start time.
•
As hot water can severely damage the internal treatment system, it should be ensured that there
is a connecting pipe of at least 3
m in length between the outlet of the treatment device and the
inlet of the hot water boiler. If the 3-m connection line cannot be assured, it is recommended to
install a non-return valve between the water treatment device and the hot water boiler.
