https://www.naturewater.eu
Item 63920, 63921
Page 10
11 2023-1
№
Name
№
Name
1
Display connection
5
Drain
2
Drain pipe
6
Clamp (loosen, install, re-tighten)
3
Clamp
7
Drain pipe
4
Ground
8
Clamp (loosen, install, re-tighten)
Note!
Secure the waste pipe and the overflow pipe to the wall with a ring clamp to prevent the hose
from jumping out of the waste pipe.
4.
Return to step 2. Place the product in the corresponding position of the installed connection.
Connect the water inlet and outlet of the bypass valve to the connection in the corresponding
water inlet and outlet direction. Then insert the large insert from the accessory kit into the slot
of the bypass valve and the water pipe connection. Then connect the display connection cable
of the control panel and cover the top cover assembly.
