https://www.naturewater.eu
Item 63920, 63921
Page 14
11 2023-1
Maintenance
•
Regularly check the water treatment device to control if there is a water leak in the water treat-
ment pipe or if water is seeping through – if this is the case, contact a specialist.
•
The recommended service life of the activated carbon is 1–2 years. It should be replaced regu-
larly according to the local water quality and actual water consumption.
•
As the product is updated regularly, the actual product may differ from the instructions.
Note!
As the pressure in the water pipe fluctuates (the water pressure is generally higher at night than
during the day), it is advisable to check the individual connections for leaks two days before installing
and commissioning the appliance.
Function and meaning of the control panel
The functions and parameters of the water treatment device are set both in the foreground and in the
background. The foreground mode is intended for users. Only the current time, the regeneration time,
the raw water hardness, and other parameters can be set. The background mode is set by the manu-
facturer at the factory, e.g., backwash, brine and slow rinse, refill, quick rinse, wash time, etc.
№
Name
№
Name
1
Menu/confirm
3
Up button
2
Manual/cancel
4
Down button
Lock
•
If the symbol is visible, this means that the control panel is locked. At this point, pressing any
button will not work. If no button is pressed for one minute, the control panel is always locked
and the symbol displayed.
•
Unlocking: Press and hold the up and down buttons simultaneously for about 5 s.
Button
•
In the “water supply” mode, press to call up the main menu for the user settings; you can
query or set the parameter values there.
•
Call up the settings menus one after the other. After setting, press , and you will hear a buzzing
sound. The setting is successful and you return to the menu interface.
Button
•
In the service mode, press to control the rotation of the valve to end the current operating
status prematurely and move on to the next operating position. If you want to end a certain step
prematurely during a regeneration or rinse, press the button to initiate the next step.
