manualshive.com logo in svg

Native Instruments Traktor Kontrol Z2, Manual, Page: 70 / 85

Share
Download
Native Instruments Traktor Kontrol Z2 Manual Download Page 70

6.2.2

Settings on Windows: The Control Panel

 

On Windows, the settings for the TRAKTOR KONTROL Z2 audio interface are accessed via a

tool called Control Panel. The Control Panel was installed together with the drivers for your Z2
during the TRAKTOR installation procedure. This section describes the Control Panel user in-

terface.

Opening the Control Panel

You can open the Control Panel in various ways:

►

From within TRAKTOR: Go to 

Preferences > Audio Setup

 and click the 

Settings

 button,

located at the right of the 

Latency

 slider and display:

►

From your desktop: Go to 

Start > Programs > Native Instruments > Traktor Kontrol Z2 >

Traktor Kontrol Z2 Control Panel

.

If you cannot find the Control Panel, the driver is most likely not installed at all. In this case,
please  re-install  the  driver  as  described  in  the  separate  Setup  Guide.  Here  is  what  you  get
when opening the Control Panel:

Appendix

The Z2 Audio Interface And Control Panel

 

TRAKTOR KONTROL Z2 - Manual - 70

Summary of Contents for Traktor Kontrol Z2






















































































Reviews:

No comments