manualshive.com logo in svg

Native Instruments Traktor Kontrol Z2, Manual

Share
Download
Native Instruments Traktor Kontrol Z2 Manual Download Page 63

5.4.21 Volume Faders And Crossfader

 

The volume faders and the crossfader.

Channel Volume

The channel volume faders control the volume of the associated channel.

The channel volume faders control Decks A and B — to adjust the volume on Decks C and

D, use the Deck (C and D) volume knobs. See 

↑

5.4.3, DECK C and DECK D Knobs

.

Crossfader

The crossfader lets you mix between two channels. Note that if the channel faders are turned
up  in  all  four  Decks,  you  will  be  able  to  crossfade  between  any  two  sets  of  Decks.  See  the
TRAKTOR manual for more details.
Crossfader reverse: On the front panel of the Z2, the 

XF REVERSE

 switch lets you reverse the

crossfader direction. When on, the Level Meter will also display 

XF REVERSE

.

TRAKTOR KONTROL Z2 Hardware Reference

Top Panel

 

TRAKTOR KONTROL Z2 - Manual - 63

Summary of Contents for Traktor Kontrol Z2






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands