Native Instruments Traktor Kontrol Z2 Manual Download Page 61

Page: 61 / 85

The

REL / INTL

buttons indicate their state with colored LEDs:

▪

Green indicates Internal Playback mode, where the TRAKTOR software is controlling Deck

playback.

▪

Orange indicates Relative (or Absolute) modes, where an external Timecode record or CD

is controlling the Deck playback.

5.4.18 SYNC Buttons A and B

The Sync buttons A and B.

The

SYNC

buttons toggle the Deck's Sync function on or off. When Sync is on, the button will

light up (Orange LED). If the Deck is in a half-sync state (e.g., with a half-lit

SYNC

button on

the TRAKTOR software), the button will be dimly lit.
If you hold

SHIFT

SYNC

for more than one second, the beat grid from the opposite

Track Deck will be applied to the associated Deck. For example if you press and hold the

SHIFT

button and the

SYNC

" button, the beat grid from the track in Deck A will be copied

onto the track in Deck B.
Pressing the

SYNC

button (without

SHIFT

) for more than one second will reset the associated

Deck's tempo (i.e., it will return to it's original tempo with 0% pitch adjust).

5.4.19 SHIFT Button

The SHIFT button on the Z2's top panel.

The

SHIFT

button acts as a modifier (just like pressing [Shift] on a computer keyboard) and

enables controls to perform secondary functions. Secondary functions are listed along with the
primary function descriptions in this TRAKTOR KONTROL Z2 User Manual.

TRAKTOR KONTROL Z2 Hardware Reference

Top Panel

TRAKTOR KONTROL Z2 - Manual - 61

Summary of Contents for Traktor Kontrol Z2






















































































Search results

Summary of Contents for Traktor Kontrol Z2

Reviews:

Brands by name

Popular brands

Native Instruments Traktor Kontrol Z2, Manual

Search results

Summary of Contents for Traktor Kontrol Z2

Reviews:

Brands by name

Popular brands