KOMPLETE AUDIO 6 – Manual – 31
EN
GL
IS
H
Connection Monitor Section
6.8 The
Connection Monitor
section in the
Diagnostics
page of the Control Panel.
The
Connection Monitor
section provides feedback on connected clients and USB data errors. It
has two displays and a button:
•
Number of Clients
: displays the number of clients connected to the interface. Multiple
ASIO applications are counted separately. WDM and WASAPI increase the number by
one, no matter how many WDM / WASAPI applications play audio.
•
USB Data Errors
: counts USB data errors. Poor quality, or long USB cables as well as ir-
radiation can be the source of connection errors on the USB bus.
•
Reset
: A click on this button resets the error count.
System Performance Test Section
6.9 The
System Performance Test
section in the
Diagnostics
page of the Control Panel.
The
System Performance Test
section provides monitoring of the current DPC (Deferred Proce-
dure Call) latency value of your Windows system. A Deferred Procedure Call is a Windows
mechanism which allows high-priority tasks (such as the basic system tasks) to delay lower-
priority tasks. This specific DPC latency is not to be confused with the overall latency, ex-
plained in chapter 10.2, but it can add to it. The section has two displays and two buttons:
•
Current Latency
: displays the current DPC latency value.
•
Maximum Latency
: displays the highest DPC latency value monitored since the last time
you either started or restarted monitoring.
•
Reset
: Press this button to reset the
Maximum Latency
value to zero.
•
Start
/
Stop
: Press this button to start monitoring DPC latency. Once started, the button
label changes to
Stop
.
Summary of Contents for Komplete Audio 6
Page 1: ...Manual...
