KOMPLETE AUDIO 6 – Manual – 29
EN
GL
IS
H
Digital Sync Source Section
6.4 The
Digital Sync
Source section in the
Audio Settings
page of the Control Panel.
In the
Digital Sync Source
section
, you can select whether the device uses its internal clock or
gets synchronized to the clock of an external device:
•
Internal
(standard setting): Leave this radio button selected if you don’t want the device
to be synchronized to the clock of an external device.
•
External S/PDIF 5|6
: Select this radio button if you want the device to be synchronized to
the clock of another external device via S/PDIF. When switching to this setting, the de-
vice automatically tries to establish synchronization to an external clock at the digital
input/output 5 and 6 (see also chapter 5.2). If the synchronization request fails, the
interface switches back to internal clock mode. If the synchronization is successful,
the top panel’s SPDIF SYNC lights (see chapter 5.3).
Direct Monitoring Section
6.5 The
Direct Monitoring
section in the
Audio Settings
page of the Control Panel.
In the
Direct Monitoring
section, you can set the device to bypass any signal processing and
send the signal from the input directly to the output of the device (at zero latency).
!
%
This function can be accessed from the MONITOR section on the device’s front panel too;
see chapter 5.1 for further information.
The
Direct Monitoring
section has a button and a drop-down menu:
•
Monitor Status
: Activating the direct monitoring routes the signal of the inputs 1 and 2 di-
rectly to the selected outputs (see
Channel
setting below) without sending them through
the computer, so you can monitor the input at zero latency.
•
Channel
: When direct monitoring is active, select to which output channels signals from
inputs 1 and 2 will be routed.
Summary of Contents for Komplete Audio 6
Page 1: ...Manual...
