GUITAR RIG SESSION – 21
It is recommended that you try the latency presets first and then continue with the subse-
quent steps of the installation. Once you are finished, you should revisit the Audio and MIDI
Settings to figure out the best latency setting for your system. If audio dropouts occur with
the preset minimal latency, try the low latency or standard latency settings. Higher latency
values will reduce the probability of audio dropouts.
4.3.2 Using the SESSION I/O as your Default Audio Interface
If you want to use the SESSION I/O for playback of all audio applications on your computer
(not only for music software), you have to set it as your default audio interface.
For Windows XP, this works as follows:
1.
Open Start > Control Panel > Sounds and Audio Devices.
2.
Select the “Audio” tab.
3.
In the “Sound playback” and “Sound recording” sections, click on the Default Device
menu, and then select SESSION I/O.
4.
Click OK to close the “Sounds and Audio Devices” dialog.
Summary of Contents for Guitar Rig Session
Page 1: ...HARDWARE REFERENCE...
