GUITAR RIG SESSION – 29
The SESSION I/O is powered via USB. Operation is guaranteed only with a USB 2.0 controller
as a single device or with self-powered USB 2.0 hubs.
After successfully installing the driver, the SESSION I/O should be recognized automatically.
If at any time the computer does not seem to recognize the SESSION I/O, disconnect the
USB cable, wait a few seconds, then re-connect it. If this does not solve the problem, restart
your computer with the interface connected.
5.3 Configuration
This chapter explains how to use the SESSION I/O audio interface under Mac OS X and
particularly with the included GUITAR RIG 4. It is assumed that you have already activated
GUITAR RIG 4 using the Service Center – please refer to the Setup Guide for help on this
process.
5.3.1 Configuring GUITAR RIG 4
We will now set up GUITAR RIG 4 to use the SESSION I/O audio interface. Start the software
before you proceed.
Summary of Contents for Guitar Rig Session
Page 1: ...HARDWARE REFERENCE...
