GUITAR RIG SESSION – 32
3.
On the Sound Effects tab, select SESSION I/O in the “Play alerts and sound effects
through” menu.
4.
Click on the Output tab, and then select SESSION I/O from the “Choose a device for
sound output” list.
5.
Click on the Input tab, and then select SESSION I/O from the “Choose a device for sound
input” list.
5.4 Audio Connections and Levels
In the following chapters you will learn how to connect your guitar and your monitoring system
to the SESSION I/O and how to set the right amplification levels both on the hardware and
on the software side of your setup.
Please start GUITAR RIG 4 before you proceed.
5.4.1 Connecting your Instrument and Adjusting the Input Level
1.
Turn down the volume on your monitoring system to prevent hearing damages.
2.
Make sure the input selector is set to “Instrument” (button not depressed) except if you
are using a preamp to boost your signal to line level.
3.
Plug the cable connected to your guitar or bass into one of the input jacks of the SESSION
I/O.
4.
Completely turn down the volume of the input channel you are not using.
Mind that for an instrument that generates a stereo signal, such as a synthesizer keyboard,
you need to connect it to both input channels for stereo sound.
Summary of Contents for Guitar Rig Session
Page 1: ...HARDWARE REFERENCE...