5.0V AC Electrical Characteristics
Unless otherwise specified, all limits are guaranteed for T
A
= 25°C. V
+
= 5.0V, V
−
= 0V, V
CM
= V
+
/2, V
O
= V
+
/2 and R
L
> 1M
Ω.
Boldface
limits apply at the temperature extremes.
Symbol
Parameter
Conditions
Min
Typ
Max
Units
SR
A
V
= +1, R
L
= 10 k
Ω
1.4
V/µs
GBW
Gain-Bandwidth Product
3.5
MHz
Φ
m
Phase Margin
79
Deg
G
m
Gain Margin
−15
dB
e
n
Input-Referred Voltage Noise
(Flatband)
f = 10kHz
6.5
nV/
e
n
Input-Referred Voltage Noise (l/f)
f = 100Hz
12
nV/
i
n
Input-Referred Current Noise
f = 1kHz
0.001
pA/
THD
Total Harmonic Distortion
f = 1kHz, A
V
= +1
R
L
= 600Ω
, V
IN
= 1 V
PP
0.007
%
Note 1:
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
Note 2:
Human Body Model is 1.5 k
Ω
in series with 100 pF. Machine Model is 0
Ω
in series with 20 pF.
Note 3:
Shorting output to V
+
will adversely affect reliability.
Note 4:
Shorting output to V
−
will adversely affect reliability.
Note 5:
The maximum power dissipation is a function of T
J(MAX)
, θ
JA
, and T
A
. The maximum allowable power dissipation at any ambient temperature is
P
D
= (T
J(MAX)
–T
A
)/θ
JA
. All numbers apply for packages soldered directly into a PC board.
Note 6:
Typical values represent the most likely parametric norm.
Note 7:
All limits are guaranteed by testing or statistical analysis.
Note 8:
Limits guaranteed by design.
Note 9:
R
L
is connected to mid-supply. The output voltage is set at 200mV from the rails. V
O
= GND + 0.2V and V
O
= V
+
−0.2V
Note 10:
For LMV772/LMV774, temperature limits apply to −40°C to 85°C.
Note 11:
For LMV772/LMV774, temperature limits apply to −40°C to 85°C. If R
L
is relaxed to 10 k
Ω
, then for LMV772/LMV774 temperature limits apply to −40°
C to 125°C.
Note 12:
The number specified is the slower of positive and negative slew rates.
Note 13:
Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating
of the device such that T
J
= T
A
.
Note 14:
Continuous operation of the device with an output short circuit current larger than 35mA may cause permanent damage to the device.
www.national.com
4
LMV771/LMV772/LMV774