National Instruments VXIpc 600 Series User Manual Download | Manualshive

Page: 13 / 88

background image

Chapter 1

Introduction

VXI/VMEpc 600 Series User Manual

1-2

©

National Instruments Corporation

Figure 1-2.

VMEpc-650 Embedded Controller

The VXI/VMEpc 600 Series controllers are B-size, embedded computers
based on x86 Processor architecture and on the Peripheral Component
Interface (PCI) bus. These computers are high-performance, easy-to-use
platforms for controlling VXI/VMEbus systems, featuring complete VXI
and VME functionality through interactive utilities and C function calls. In
addition, the VXI/VMEpc 600 Series has Ethernet capability plus an
IEEE 488.2 interface that is compatible with the NI-488.2 architecture.

The VXI/VMEpc 600 Series is a custom computer that you install directly
in two B-size slots of your VXI or VME mainframe. An embedded
computer can take full advantage of the VXI/VME high-performance
backplane capabilities and give you direct control of VXI registers,
memory, interrupts, and triggers.

All models in the VXI/VMEpc 600 Series are fully VXIplug&play
compliant and are compatible with PC-compatible software tools, the
National Instruments LabVIEW and LabWindows/CVI application
software, and the NI-VXI, NI-VISA, and NI-488.2 bus interface software.

«
...
11
12
13
14
15
...
»

Summary of Contents for VXIpc 600 Series

























































































Reviews:

No comments

Related manuals for VXIpc 600 Series

Brand: Particle Pages: 6

Brand: XBOX Pages: 2

Brand: Aalborg Pages: 128

Brand: Panasonic Pages: 27

Brand: Panasonic Pages: 78

Brand: Panasonic Pages: 98

Brand: NAiS Pages: 173

Brand: Panasonic Pages: 2

Brand: Idesco Pages: 11

Brand: B meters Pages: 2

Brand: Dakota Digital Pages: 6

CMD-2000 Series

Brand: Dakota Digital Pages: 10

Brand: Z-Wave Pages: 6

Brand: ECKELMANN Pages: 178

Brand: echoflex Pages: 8

Brand: H3C Pages: 17

Brand: H3C Pages: 32

Brand: Jabra Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands