40
|
ni.com
|
NI VirtualBench Calibration Procedure
19. Remove the connections from channel 1. Connect VirtualBench channel 2 to the
oscilloscope calibrator active head, as shown in Figure 20.
Figure 20.
Oscilloscope Gain Channel 2 Connection Diagram
20. Repeat steps 2 to 18 for all ranges on channel 2.
Note
When calling
MSO Configure Analog Channel
in step 4, change the
Channel
input to
mso/2
.
21. Remove the connections from channel 2.
1
VirtualBench Oscilloscope
2
Oscilloscope Calibrator
3
Oscilloscope Calibrator Active Head
2
CH 2
CH 1
1
3