USRP-2943..................................................................................................................... 20
USRP-2944..................................................................................................................... 24
USRP-2945..................................................................................................................... 27
GPIO Connector..............................................................................................................32
Where to Go Next................................................................................................................... 33
Worldwide Support and Services............................................................................................ 33
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Caution
To ensure the specified EMC performance, the length of all I/O cables
except those connected to the Ethernet and GPS antenna ports must be no longer
than 3 m (10 ft).
Caution
This product is not approved or licensed for transmission over the air
using an antenna. As a result, operating this product with an antenna may violate
local laws. Ensure that you are in compliance with all local laws before operating
this product with an antenna.
Verifying the System Requirements
To use the NI-USRP instrument driver, your system must meet certain requirements.
Refer to the product readme, which is available online at
information about minimum system requirements, recommended system, and supported
application development environments (ADEs).
2
|
ni.com
|
USRP-2940/2942/2943/2944/2945 Getting Started Guide
