©
National Instruments Corporation
11
SCXI-1335 Terminal Block Installation Guide
Removing the Matrix Expansion Plug
To remove the matrix expansion plug, complete the following steps while
referring to Figure 5:
Figure 5.
Removing the Matrix Expansion Plug
1.
Place the tip of a flat blade screwdriver in the pry slot at the end of the
matrix expansion plug.
2.
Gently, pry the matrix expansion plug off the mating connectors.
1
Pry Slots
2
Top Matrix Expansion Plug
3
SCXI-1335 Terminal Blocks
4
Bottom Matrix Expansion Plug
2
1
3
4
1
